How to make PVA glue? mixture by combining white glue with water
How to Make a Glue and Water (PVA) mixture?
To
make a simple mixture by combining white glue with water you will need to adopt
the following steps. This is the easiest glue to make, since rest of the home
made techniques are very difficult. To make this mixture all you have to do is
add 3 parts of glue to 1 part of water, for instance, if you have 3 cups of
glue, add 1 cup of water to thin it to the appropriate consistency (or if using
a good, thick glue, like elmers you can do 1/2 and 1/2).
Procedure:
Step 1: Take
a container to make the mixture.
Step 2: Take
50grs of white adhesive in the container.
Step 3: Add
16grs of plain water to the adhesive.
Step 4: Stir
thoroughly until the water and adhesive mixes properly (water and the white
adhesive should not be seen separated from each other).
Now
it is ready to be used to make any creative thing out of it..
Aptitude Amplifier © 2017. All Rights Reserved.